2005 Yamaha Motorsports RS Vector ER Owners Manual - Page 80

2005 Yamaha Motorsports RS Vector ER Manual

Get 2005 Yamaha Motorsports RS Vector ER PDF manuals and user guides View all 2005 Yamaha Motorsports RS Vector ER manuals

Page 80 highlights

ESU04271 Anti-bottoming stopper adjustment For RS90/RS90R The spring force can be adjusted by changing the installation location of the anti-bottoming stoppers. WARNING @ Be sure to have a Yamaha dealer make this adjustment. @ CD-24E Installation location Spring force Standard S Soft M Medium M H Hard NOTE: @ Be sure to make this adjustment when there is no load (rider or cargo) on the snowmobile. @ 1. Loosen the anti-bottoming stopper nut 1 while holding the anti-bottoming stopper bolt 2 securely with a wrench so it does not move, and then remove the nut, bolt, and anti-bottoming stopper 3. CAUTION: @ Never allow the bolt to move while loosening or tightening the nut. @ 2. Install the anti-bottoming stopper in the desired location. 3. Tighten the nut while holding the bolt securely. Anti-bottoming stopper nut tightening torque: 60 Nm (6.0 m·kgf, 43 ft·lb) CAUTION: @ Make sure that the anti-bottoming stoppers are installed in the same location on both sides. @ 8-28

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
8-28
ESU04271
Anti-bottoming stopper adjustment
For RS90/RS90R
The spring force can be adjusted by changing the instal-
lation location of the anti-bottoming stoppers.
WARNING
@
Be sure to have a Yamaha dealer make this adjust-
ment.
@
CD-24E
NOTE:
@
Be sure to make this adjustment when there is no load
(rider or cargo) on the snowmobile.
@
1. Loosen the anti-bottoming stopper nut
1
while hold-
ing the anti-bottoming stopper bolt
2
securely with a
wrench so it does not move, and then remove the nut,
bolt, and anti-bottoming stopper
3
.
CAUTION
:
@
Never allow the bolt to move while loosening or
tightening the nut.
@
2. Install the anti-bottoming stopper in the desired loca-
tion.
3. Tighten the nut while holding the bolt securely.
CAUTION
:
@
Make sure that the anti-bottoming stoppers are
installed in the same location on both sides.
@
Installation location
S
M
H
Spring force
Soft
Medium
Hard
Standard
M
Anti-bottoming stopper nut tightening torque:
60 Nm (6.0 m·kgf, 43 ft·lb)