2005 Yamaha Motorsports RS Vector ER Owners Manual - Page 70

2005 Yamaha Motorsports RS Vector ER Manual

Get 2005 Yamaha Motorsports RS Vector ER PDF manuals and user guides View all 2005 Yamaha Motorsports RS Vector ER manuals

Page 70 highlights

A B 3. Remove the dipstick and check that the oil is between the upper and lower levels. If not, add oil to the upper level. 2 Upper level 3 Lower level Drive chain oil: GL-3 75W or 80W È For models without reverse transmissions (RS90/RS90M) É For models with reverse transmissions (RS90R/RSG90) CAUTION: @ Make sure that no foreign material enters the drive chain housing. @ 4. Install the dipstick and align the notch 4 of the dipstick handle with the projection 5 of the drive chain housing. Chain tension adjustment 1. Loosen the locknut. 2. Turn the adjusting bolt clockwise until it is finger tight, and then loosen it 1/4 turn. 3. Hold the adjusting bolt in place while tightening the locknut. 1 Locknut 2 Adjusting bolt 8-18

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
8-18
3. Remove the dipstick and check that the oil is between
the upper and lower levels. If not, add oil to the upper
level.
2
Upper level
3
Lower level
È
For models without reverse transmissions
(RS90/RS90M)
É
For models with reverse transmissions
(RS90R/RSG90)
CAUTION
:
@
Make sure that no foreign material enters the drive
chain housing.
@
4. Install the dipstick and align the notch
4
of the dip-
stick handle with the projection
5
of the drive chain
housing.
Chain tension adjustment
1. Loosen the locknut.
2. Turn the adjusting bolt clockwise until it is finger tight,
and then loosen it 1/4 turn.
3. Hold the adjusting bolt in place while tightening the
locknut.
1
Locknut
2
Adjusting bolt
A
B
Drive chain oil: GL-3
75W or 80W