2003 Yamaha Motorsports Royal Star Venture Owners Manual - Page 96

2003 Yamaha Motorsports Royal Star Venture Manual

Get 2003 Yamaha Motorsports Royal Star Venture PDF manuals and user guides View all 2003 Yamaha Motorsports Royal Star Venture manuals

Page 96 highlights

PERIODIC MAINTENANCE AND MINOR REPAIR 8. Add the specified amount of the recommended engine oil, and then install and tighten the oil filler cap. Recommended engine oil: See page 9-1. Oil quantity: Without oil filter cartridge replacement: 3.7 US qt (3.1 Imp qt, 3.5 L) With oil filter cartridge replacement: 3.9 US qt (3.3 Imp qt, 3.7 L) Total amount (dry engine): 4.6 US qt (3.8 Imp qt, 4.3 L) ECA00133 _ 1. Torque wrench 2. Oil filter wrench 6. Install the new oil filter cartridge with an oil filter wrench, and then tighten it to the specified torque with a torque wrench. 7 Tightening torque: Oil filter cartridge: 12 ft·lbf (1.7 m·kgf, 17 Nm) 7. Install the engine oil drain bolt, and then tighten it to the specified torque. Tightening torque: Engine oil drain bolt: 31 ft·lbf (4.3 m·kgf, 43 Nm) CAUTION: G In order to prevent clutch slippage (since the engine oil also lubricates the clutch), do not mix any chemical additives. Do not use oils with a diesel specification of "CD" or oils of a higher quality than specified. In addition, do not use oils labeled "ENERGY CONSERVING II" or higher. G Make sure that no foreign material enters the crankcase. 9. Start the engine, and then let it idle for several minutes while checking it for oil leakage. If oil is leaking, immediately turn the engine off and check for the cause. _ NOTE: After the engine is started, the engine oil level warning light should go off if the oil level is sufficient. _ _ 7-15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
PERIODIC MAINTENANCE AND MINOR REPAIR
7-15
7
6. Install the new oil filter cartridge
with an oil filter wrench, and then
tighten it to the specified torque
with a torque wrench.
7.
Install the engine oil drain bolt, and
then tighten it to the specified
torque.
8. Add the specified amount of the
recommended engine oil, and
then install and tighten the oil filler
cap.
ECA00133
CAUTION:
_
●
In order to prevent clutch slip-
page (since the engine oil also
lubricates the clutch), do not
mix any chemical additives. Do
not use oils with a diesel speci-
fication of “CD” or oils of a
higher quality than specified. In
addition, do not use oils labeled
“ENERGY CONSERVING II” or
higher.
●
Make sure that no foreign mate-
rial enters the crankcase.
_
9.
Start the engine, and then let it idle
for several minutes while checking
it for oil leakage. If oil is leaking,
immediately turn the engine off
and check for the cause.
NOTE:
_
After the engine is started, the engine
oil level warning light should go off if the
oil level is sufficient.
_
1.
Torque wrench
2.
Oil filter wrench
Tightening torque:
Oil filter cartridge:
12 ft·lbf (1.7 m·kgf, 17 Nm)
Tightening torque:
Engine oil drain bolt:
31 ft·lbf (4.3 m·kgf, 43 Nm)
Recommended engine oil:
See page 9-1.
Oil quantity:
Without oil filter cartridge
replacement:
3.7 US qt (3.1 Imp qt, 3.5 L)
With oil filter cartridge
replacement:
3.9 US qt (3.3 Imp qt, 3.7 L)
Total amount (dry engine):
4.6 US qt (3.8 Imp qt, 4.3 L)