2003 Yamaha Motorsports Big Bear 400 4x4 Owners Manual - Page 116
2003 Yamaha Motorsports Big Bear 400 4x4 Manual
Page 116 highlights
EBU00997 Engine oil Engine oil level measurement 1. Place the machine on a level surface. 2. Warm up the engine for several minutes, and then stop it. 3. Remove the engine oil filler cap, and then wipe the dipstick off with a clean rag. Insert the dipstick in the filler hole without screwing it in. 4. Remove the dipstick, and then check the oil level. NOTE: The oil level should be between the maximum and minimum marks. If the level is low, add oil to raise it to the proper level. _ _ CAUTION: _ Be sure no foreign material enters the crankcase. _ 1. Oil filler cap NOTE: Wait a few minutes until the oil level settles before checking. _ _ 1. Dipstick 3. Minimum level mark 8-5 2. Maximum level mark
8-5
EBU00997
Engine oil
Engine oil level measurement
1.
Place the machine on a level surface.
2.
Warm up the engine for several minutes,
and then stop it.
3.
Remove the engine oil filler cap, and then
wipe the dipstick off with a clean rag. In-
sert the dipstick in the filler hole without
screwing it in.
1.
Oil filler cap
NOTE:
_
Wait a few minutes until the oil level settles
before checking.
_
4.
Remove the dipstick, and then check the
oil level.
NOTE:
_
The oil level should be between the maximum
and minimum marks. If the level is low, add oil
to raise it to the proper level.
_
CAUTION:
_
Be sure no foreign material enters the
crankcase.
_
1.
Dipstick
2.
Maximum level mark
3.
Minimum level mark