2002 Yamaha Motorsports Virago 250 Owners Manual - Page 75

2002 Yamaha Motorsports Virago 250 Manual

Get 2002 Yamaha Motorsports Virago 250 PDF manuals and user guides View all 2002 Yamaha Motorsports Virago 250 manuals

Page 75 highlights

PERIODIC MAINTENANCE AND MINOR REPAIR Tightening torque: Front wheel axle pinch bolt: 20 Nm (2.0 m·kgf, 14 ft·lb) 8. Connect the speedometer cable. 1. Remove the axle nut cotter pin and the brake torque rod cotter pin. 2. Loosen the axle nut and the brake torque rod nut at the brake shoe plate. 3. Lift the rear wheel off the ground according to the procedure on page 6-34. 4. Disconnect the brake torque rod from the brake shoe plate by removing the nut and the bolt. 5. Remove the brake pedal free play adjusting nut, and then disconnect the brake rod at the brake camshaft lever. 1. 2. 3. 4. 5. 6. Brake torque rod Brake torque rod cotter pin Brake torque rod bolt Brake rod Brake pedal free play adjusting nut Brake cam shaft lever EAU01550* 6 Rear wheel To remove the rear wheel EW000122 _ WARNING q It is advisable to have a Yamaha dealer service the wheel. q Securely support the motorcycle so that there is no danger of it falling over. _ 6-36

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
PERIODIC MAINTENANCE AND MINOR REPAIR
6-36
6
8.
Connect the speedometer cable.
EAU01550*
Rear wheel
To remove the rear wheel
EW000122
WARNING
_
●
It is advisable to have a Yamaha
dealer service the wheel.
●
Securely support the motor-
cycle so that there is no danger
of it falling over.
_
1. Remove the axle nut cotter pin
and the brake torque rod cotter
pin.
2.
Loosen the axle nut and the brake
torque rod nut at the brake shoe
plate.
3.
Lift the rear wheel off the ground
according to the procedure on
page 6-34.
4. Disconnect the brake torque rod
from the brake shoe plate by re-
moving the nut and the bolt.
5.
Remove the brake pedal free play
adjusting nut, and then disconnect
the brake rod at the brake cam-
shaft lever.
Tightening torque:
Front wheel axle pinch bolt:
20 Nm (2.0 m·kgf, 14 ft·lb)
1.
Brake torque rod
2.
Brake torque rod cotter pin
3.
Brake torque rod bolt
4.
Brake rod
5.
Brake pedal free play adjusting nut
6.
Brake cam shaft lever