2002 Yamaha Motorsports Virago 250 Owners Manual - Page 58
2002 Yamaha Motorsports Virago 250 Manual
Page 58 highlights
PERIODIC MAINTENANCE AND MINOR REPAIR EW000106 _ 1. Locknut 2. Adjusting bolt 1. Brake pedal free play adjusting nut 1. Loosen the locknut at the brake pedal. 2. To raise the brake pedal, turn the adjusting bolt in direction a. To lower the brake pedal, turn the adjusting bolt in direction b. 3. Tighten the locknut. EWA00044 WARNING After adjusting the brake pedal position, the brake pedal free play must be adjusted. _ _ Brake pedal free play The brake pedal free play should measure 20-30 mm (0.8-1.2 in) at the brake pedal end. Periodically check the brake pedal free play and, if necessary, adjust it as follows. To increase the brake pedal free play, turn the adjusting nut at the brake rod in direction a. To decrease the brake pedal free play, turn the adjusting nut in direction b. WARNING After adjusting the drive chain slack or removing and installing the rear wheel, always check the brake pedal free play. q If proper adjustment cannot be obtained as described, have a Yamaha dealer make this adjustment. q After adjusting the brake pedal free play, check the operation of the brake light. q _ 6 6-19