2002 Yamaha Motorsports Virago 250 Owners Manual - Page 29
2002 Yamaha Motorsports Virago 250 Manual
Page 29 highlights
INSTRUMENT AND CONTROL FUNCTIONS EW000040 EAU00330 WARNING Always adjust both shock absorber assemblies equally, otherwise poor handling and loss of stability may result. @ @ Sidestand The sidestand is located on the left side of the frame. Raise the sidestand or lower it with your foot while holding the motorcycle upright. NOTE: The built-in sidestand switch is part of the ignition circuit cut-off system, which cuts the ignition in certain situations. (See further down for an explanation of the ignition circuit cut-off system.) @ @ 3 1. Spring preload adjusting ring 2. Position indicator EAU00300 Adjusting the shock absorber assemblies Each shock absorber assembly is equipped with a spring preload adjusting ring. EC000015 Adjust the spring preload as follows. To increase the spring preload and thereby harden the suspension, turn the adjusting ring on each shock absorber assembly in direction a. To decrease the spring preload and thereby soften the suspension, turn the adjusting ring on each shock absorber assembly in direction b. NOTE: Align the appropriate notch in the adjusting ring with the position indicator on the shock absorber. @ @ CAUTION: Never attempt to turn an adjusting mechanism beyond the maximum or minimum settings. @ @ CI-10E Setting Minimum (soft) Standard Maximum (hard) 1 2 5 3-10