2013 Volvo XC70 Owner's Manual - Page 340

09 Maintenance and specifications 09 Wiper blades and washer fluid To return the wipers from the service position to the normal position, fold the wipers back against the windshield and press the START/ STOP ENGINE button briefly to put the ignition in mode I (or start the engine). 3. Pull out the blade to release it from the wiper arm. 4. Press the new wiper blade into place and check that it seats securely. 5. Fold the wiper arm back toward the tailgate window. Cleaning Keeping the windshield and wiper blades clean helps improve visibility and prolongs the service life of the wiper blades. Clean the wiper blades with a stiff-bristle brush and lukewarm soap solution or car washing detergent. Filling washer fluid Replacing the tailgate wiper blade Slide in the new wiper blade until it clicks into place. Check that the blade is securely in place. 4. Press the wipers back against the windshield. G032770 With the wipers in the service position, fold out the wiper arm from the windshield. Press the button on the wiper blade attachment and pull the wiper blade straight out, parallel with the wiper arm. Location of the washer fluid reservoir The windshield and headlight washers share a common reservoir. The washer fluid reservoir is located on the driver's side of the engine compartment. During cold weather, the reservoir should be filled with windshield washer solvent containing antifreeze. For capacities, see page 364. 1. Fold the wiper arm outward. 2. Grasp the inner section of wiper blade (at the arrow). 338 G021764