2013 Volvo XC70 Owner's Manual - Page 283

07 During your trip Cargo area Steel cargo grid* Installing the steel cargo grid In order to install the steel grid, the rear seat backrests must be completely folded down, see page 89 for instructions. NOTE G018367 G018368 • • G017748 The steel cargo grid is easiest to install by two people, and should be folded down. When installing the grid, the handle should be on the front side of the grid - ). (see illustrations Your vehicle can be equipped with a steel grid that helps prevent objects in the cargo area from moving forward into the passenger compartment. Put the handle in the installation position, see the illustration. Press lightly on the handle in order to turn it to this position, see the arrow. Press in the piston toward the grid and press it into the attachment bracket near the ceiling. Turn the handle 90° . Press lightly as shown in illustration if necessary. Attach the grid by moving the handle 90°. Do the same on the opposite side of the vehicle. Installing the cargo grid Folding the grid up/down Grasp the lowering edge of the grid and pull it rearward/upward, or push it downward/forward. NOTE If the steel grid is to be used with the optional cargo area cover, the grid must be folded down before the cargo area cover is put in place. 07 G018369 * Option/accessory, for more information, see Introduction. 281