2013 Volvo XC70 Owner's Manual - Page 317

08 Wheels and tires Changing a wheel Jack attachment points Lug wrench and towing eyelet 5. Screw the towing eyelet into the lug wrench as shown in the illustration. 6. With the vehicle still on the ground, use the lug wrench/towing eyelet to loosen the wheel nuts ½ - 1 turn by exerting downward (counterclockwise) pressure. CAUTION The towing eyelet must be screwed into the lug wrench as far as possible. 7. There are two jack attachment points on each side of the vehicle. Position the jack correctly in the attachment (see the illustration) and crank while simultaneously guiding the base of the jack to the ground. The base of the jack must be flat on a level, firm, non-slippery surface. Before raising the vehicle, check that the jack is still correctly positioned in the attachment. 8. Raise the vehicle until the wheel to be changed is lifted off the ground. 9. Unscrew the wheel nuts completely and remove the wheel. 08 315