2008 Volvo S60 Owner's Manual - Page 137

The attachment brackets for the load carriers are located under the roof molding. 1. Make sure that the load carriers are placed in the right direction. See the mark on the decal under the cover. 2. Press the guide lugs into the holes (1). 3. Carefully lower the opposite side of the load carrier to the roof. 4. Loosen the tightening wheel slightly. Slide the hook on the load carrier attachment into the attachment bracket under the roof molding. 5. Turn the tightening wheel to secure the load carrier in the attachment bracket. 148 06 Starting and driving Load carriers (accessory) 6. Repeat this procedure for the other load carrier attachments. 7. Check that the hooks on all four load carrier attachments are securely tightened in the respective attachment brackets on the roof of the vehicle. 8. Press down the covers. Check periodically that the load carriers and load are properly secured. 149 06 Starting and driving Cold weather precautions If you wish to check your vehicle before the approach of cold weather, the following advice is worth noting: Make sure that the engine coolant contains 50 percent antifreeze. Any other mixture will reduce freeze protection. This gives protection against freezing down to - 31°F (-35°C). See section "Coolant". The use of "recycled" antifreeze is not approved by Volvo. Different types of antifreeze must not be mixed. Volvo recommends using only genuine Volvo antifreeze in your vehicle's radiator. Your Volvo retailer stocks plenty of Volvo engine coolant to protect your vehicle during cold weather. Try to keep the fuel tank well filled - this prevents the formation of condensation in the tank. In addition, in extremely cold weather conditions it is worthwhile to add fuel line de-icer before refueling. The viscosity of the engine oil is important. Oil with low viscosity (thinner oil) improves cold-weather starting as