2007 Volvo S40 Owner's Manual - Page 108

In certain situations it may be desirable to turn off the accessory inclination and movement alarm sensors if, for example, you drive your vehicle onto a ferry where the rocking of the boat could trigger the alarm or if a pet is left in the vehicle with the doors locked. 1. From position II or higher, turn the ignition key to 0 and remove it from the ignition switch1 2. Press the button (1). The LED in the button will remain on for one minute after the key has been removed from the ignition switch or until the car is locked. 1 The optional keyless drive start control does not need to be removed. CAUTION The accessory sensors are automatically reconnected to the alarm system the next time the vehicle is unlocked and then locked again. This function will not turn off the vehicle's standard alarm U.S.A. FCC ID: MAYDA 5823(3) This device complies with part 15 of the FCC rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Canada IC: 4405A-DA 5823(3) Movement sensor DA5823 by Dynex Operation is subject to the following conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. 119 05 Locks and alarm This page left intentionally blank. Contents | Top of Page