2016 Polaris Sportsman Touring 570 EPS Owners Manual - Page 137
2016 Polaris Sportsman Touring 570 EPS Manual
Page 137 highlights
MAINTENANCE Battery Battery Installation Using a new battery that has not been fully charged can damage the battery and result in a shorter life. It can also hinder vehicle performance. Follow the battery charging instructions on page 137 before installing the battery. An optional extreme use battery may be available for your model. If the performance of the factory-installed battery is inadequate due to operation in extreme cold or due to extended use of multiple electrical accessories, your POLARIS dealer can assist. Your dealer can provide any installation procedures that may differ for an extreme use battery. 1. Ensure that the battery is fully charged. 2. Place the battery in the battery holder. 3. With conventional batteries, install the battery vent tube (sealed batteries do not have a vent tube). The vent tube must be free of obstructions and securely installed. Route the tube away from the frame and vehicle body to prevent contact with electrolyte. WARNING! Battery gases could accumulate in an improperly installed vent tube and cause an explosion, resulting in serious injury or death. Always ensure that the vent tube is free of obstructions and is securely installed as recommended. 4. On conventional batteries, coat the terminals with dielectric grease or petroleum jelly. 5. Connect and tighten the red (positive) cable first. 6. Connect and tighten the black (negative) cable last. 7. Install the battery cover (if equipped). 8. Secure the battery hold-down strap. 9. Verify that cables are properly routed. Cables should be safely tucked away at the front and rear of the battery. 135