2015 Polaris Vegas Jackpot Owners Manual - Page 43

2015 Polaris Vegas Jackpot Manual

Page 43 highlights

Pre-Ride Inspections Rear Brake Fluid Level 1. Remove the right side cover. 2. Straddle the motorcycle and bring it to the fully upright position. 3. View the brake fluid through the reservoir. The fluid should be clear. Replace cloudy or contaminated fluid. 4. The fluid level should be between the minimum and maximum marks on the reservoir. Add fluid as needed. See page 67. Maximum Mark Minimum Mark Brake Lines Inspect all brake hoses and connections for dampness or stains from leaking or dried fluid. Tighten any leaking connections and replace components as necessary. Brake Pads Inspect front and rear brake pad thickness. Replace brake pads when wear lines are no longer visible, or when pad thickness reaches 1.5 mm. See page 68. Throttle 1. Rotate the throttle control grip. It should rotate smoothly from the rest position to the completely open position. It should return to the rest position quickly when released. 2. Remove the right side access cover. Inspect throttle cables for frayed ends. 3. Service the throttle system if throttle operation is not smooth, if throttle grip does not return properly, or if cable ends are frayed. See the VICTORY Service Manual or your authorized VICTORY dealer. 2-4 mm Access Cover Throttle Cable Ends Throttle Freeplay Throttle freeplay is the amount of throttle control grip movement from the rest position to the point of cable resistance. Measure this distance. Freeplay should be 2-4 mm. Adjust throttle freeplay as needed. See page 64. 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112

41
Pre-Ride Inspections
Rear Brake Fluid Level
1.
Remove the right side cover.
2.
Straddle the motorcycle and bring it to the fully
upright position.
3.
View the brake fluid through the reservoir. The
fluid should be clear. Replace cloudy or
contaminated fluid.
4.
The fluid level should be between the minimum
and maximum marks on the reservoir. Add
fluid as needed. See page 67.
Brake Lines
Inspect all brake hoses and connections for dampness or stains from leaking or dried fluid.
Tighten any leaking connections and replace components as necessary.
Brake Pads
Inspect front and rear brake pad thickness. Replace brake pads when wear lines are no longer
visible, or when pad thickness reaches 1.5 mm. See page 68.
Throttle
1.
Rotate the throttle control grip. It
should rotate smoothly from the rest
position to the completely open posi-
tion. It should return to the rest posi-
tion quickly when released.
2.
Remove the right side access cover.
Inspect throttle cables for frayed ends.
3.
Service the throttle system if throttle
operation is not smooth, if throttle grip
does not return properly, or if cable
ends are frayed. See the
VICTORY
Service Manual
or your authorized
VICTORY dealer.
Throttle Freeplay
Throttle freeplay is the amount of throttle
control grip movement from the rest posi-
tion to the point of cable resistance. Mea-
sure this distance. Freeplay should be 2-4
mm. Adjust throttle freeplay as needed.
See page 64.
Maximum
Mark
Minimum
Mark
Access Cover
Throttle
Cable Ends
2-4 mm