2013 Polaris Ranger 800 Midsize Owners Manual - Page 65
2013 Polaris Ranger 800 Midsize Manual
Page 65 highlights
MAINTENANCE Fuses If the engine stops or will not start, or if you experience other electrical failures, a fuse may need replacement. Locate and correct any short circuits that may have caused the blown fuse, then replace the fuse. Spare fuses are provided in the fuse box. If you suspect that a fuse or relay may not be working properly, please see your POLARIS dealer. Fuse 20A 10A 20A 10A 20A Feature Supported Lights: Headlights, Taillights Drive: AWD Accessory: Winch Switch, 12V Power Receptacle Fuel Pump Electronic Engine Control, Starting Lights Poor lighting can result in reduced visibility when driving. Headlight and taillight lenses become dirty during normal operation. Clean lights frequently and replace burned out lamps promptly. Always make sure lights are adjusted properly for best visibility. When servicing a halogen lamp, don't touch the lamp with bare fingers. Oil from your skin leaves a residue, causing a hot spot that will shorten the life of the lamp. Headlight Lamp Replacement 1. Open the hood. CAUTION! Hot components can cause burns to skin. Allow lamps to cool before servicing. Wiring Harness 2. Unplug the headlamp from the wiring harness. Be sure to pull on the connector, not on the wiring. 3. Turn the lamp counter-clockwise to remove it. 4. Install the new lamp. Tip: Make sure the tab on the lamp locates properly in the housing. 5. Reinstall the harness assembly into the headlight assembly. 63