2013 Polaris Ranger 800 Midsize Owners Manual - Page 27
2013 Polaris Ranger 800 Midsize Manual
Page 27 highlights
FEATURES AND CONTROLS Instrument Cluster Rider Information Center The rider information center is 2 located in the instrument cluster. All segments will light up for one second at start-up. If the instrument E F cluster fails to illuminate, a battery RPM Trip 1 over-voltage may have occurred 1 and the instrument cluster may have 3 shut off to protect the electronic km mi speedometer. If this occurs, take the vehicle to your POLARIS dealer for 4 proper diagnosis. The information center is set to dis8 play standard units of measurement 7 6 5 and a 12-hour clock at the factory. To change to metric and/or a 24hour clock, see page 26. 1. Gear Indicator - This indicator displays gear shifter position. H = High Gear L = Low Gear N = Neutral R = Reverse Gear -- = Gear Signal Error (or shifter between gears) 2. Fuel Gauge - The segments of the fuel gauge show the level of fuel in the fuel tank. When the last segment clears, a low fuel warning is activated. All segments including the fuel icon will flash. Refuel immediately. 88:88 Tip: If the fuel icon fails to display, an open or short circuit has occurred in the fuel sensor circuit. See your dealer. 3. Information Display Area - This area displays odometer, trip meter, engine hour meter and programmable service hour interval. 4. Under / Over Voltage - This warning usually indicates that the vehicle is operating at an RPM too low to keep the battery charged. It may also occur when the engine is at idle and high electrical load (lights, cooling fan, accessories) is applied. Drive at a higher RPM or recharge the battery to clear the warning. 5. Clock - The clock displays time in a 12-hour or 24-hour format. See page 26 for resetting instructions. 6. Service Indicator - A flashing wrench symbol alerts the operator that the preset service interval has been reached. The vehicle should be brought to your dealer for scheduled maintenance. See page 26 for resetting instructions. 7. 4X4 Indicator - This indicator illuminates when the 4X4 system is engaged (switch is on 4X4). 8. Turf Mode Indicator - This indicator illuminates when the operator unlocks the differential. See page 40. 25