2013 Polaris Outlaw 50 Owners Manual - Page 122
2013 Polaris Outlaw 50 Manual
Page 122 highlights
Maintenance Spark Arrester 1. Remove the three bolts and remove the arrester from the end of the muffler. 2. Use a non-synthetic brush to clean the arrester screen. A synthetic brush may melt if components are warm. If necessary, blow debris from the screen with compressed air. 3. Inspect the screen for wear and damage. Replace the arrester if damage is found. 4. Reinstall the arrester. 5. Torque the bolts to 7 ft. lbs. (9.5 Nm). Bolts Arrester Screen 119
119
Maintenance
Spark Arrester
1.
Remove the three bolts and remove the
arrester from the end of the muffler.
2.
Use a non-synthetic brush to clean the
arrester screen. A synthetic brush may
melt if components are warm. If necessary,
blow debris from the screen with com-
pressed air.
3.
Inspect the screen for wear and damage.
Replace the arrester if damage is found.
4.
Reinstall the arrester.
5.
Torque the bolts to 7 ft. lbs. (9.5 Nm).
Arrester
Screen
Bolts