2012 Polaris Ranger 800 Crew Owners Manual - Page 90
2012 Polaris Ranger 800 Crew Manual
Page 90 highlights
TROUBLESHOOTING Park Brake Engine Limiting Feature Fails to Disengage Possible Cause Park brake is not completely disengaged Park brake connector malfunction or switch movement or failure Solution Ensure lever is in forward-most position Disconnect the connector if temporary continued operation is necessary, see your dealer promptly for service Engine Doesn't Turn Over Possible Cause Low battery voltage Loose battery connections Loose solenoid connections Loose electronic control box connections Solution Recharge the battery to 12.8 VDC Check all connections and tighten Check all connections and tighten Inspect, clean, reinstall connectors Engine Turns Over, Fails to Start Possible Cause Out of fuel Water is present in fuel Old or non-recommended fuel Fouled or defective spark plugs No spark to spark plug Water or fuel in crankcase Low battery voltage Mechanical failure Solution Refuel Drain the fuel system and refuel Replace with fresh recommended fuel Inspect plugs and replace if necessary Inspect plugs and replace if necessary Immediately see your POLARIS dealer Recharge the battery to 12.8 VDC See your dealer 86