2012 Polaris Ranger 800 Crew Owners Manual - Page 72

2012 Polaris Ranger 800 Crew Manual

Get 2012 Polaris Ranger 800 Crew PDF manuals and user guides View all 2012 Polaris Ranger 800 Crew manuals

Page 72 highlights

MAINTENANCE Lights Headlight Beam Adjustment X X 8" (20 cm) 25 ft. (7.6 m) 1. Place the vehicle on a level surface with the headlight approximately 25 ft. (7.6 m) from a wall. 2. Place the transmission in gear. Engage the park brake. 3. Measure the distance from the floor to the center of the headlight and make a mark on the wall at the same height. 4. Apply the brakes. Start the engine. Turn on the headlights. 5. Observe the headlight aim. The most intense part of the headlight beam should be aimed 8" (20 cm) below the mark placed on the wall. Include the weight of a rider on the seat while performing this step. 6. If a headlight needs adjustment, locate the adjustment screw at the back of the headlight. 7. Loosen the screw, adjust the headlight, and tighten the screw. 8. Repeat steps 5-7 until the lamp is properly adjusted. 68

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
68
MAINTENANCE
Lights
Headlight Beam Adjustment
1.
Place the vehicle on a level surface with the headlight approximately 25 ft. (7.6 m) from
a wall.
2.
Place the transmission in gear. Engage the park brake.
3.
Measure the distance from the floor to the center of the headlight and make a mark on
the wall at the same height.
4.
Apply the brakes. Start the engine. Turn on the headlights.
5.
Observe the headlight aim. The most intense part of the headlight beam should be aimed
8" (20 cm) below the mark placed on the wall. Include the weight of a rider on the seat
while performing this step.
6.
If a headlight needs adjustment, locate the adjustment screw at the back of the headlight.
7.
Loosen the screw, adjust the headlight, and tighten the screw.
8.
Repeat steps 5-7 until the lamp is properly adjusted.
25 ft.
(7.6 m)
8" (20 cm)
X
X