2008 Polaris Sportsman 800 EFI Owners Manual - Page 95
2008 Polaris Sportsman 800 EFI Manual
Page 95 highlights
Air Filter 1. Remove the seat. 2. Release the air box cover clips, and remove the air box cover. 3. Loosen the clamp and remove the filter. 4. Remove the fabric type pre-filter from the main filter. Wash the pre-filter in soapy water, then rinse and let dry. 5. Reinstall the pre-filter over the main filter. NOTE: Install a new main filter if needed. MAINTENANCE Pre-Filter Main Filter 6. Reinstall the filter into the air box and tighten the clamp. Do not over-tighten the clamp, as filter damage could occur. 7. Reinstall the air box cover and the seat. Fuse Replacement If the engine stops or will not start, or if you experience other electrical failures, a fuse may need replacement. Locate and correct any short circuits that may have caused the blown fuse, then replace the fuse. NOTE: Spare fuses are provided in a compartment on the top of the access door. 1. Open the front box cover and pull open the access door. 2. Remove the suspect fuse from the fuse panel. If the fuse is blown, install a new fuse with the same amperage. 3. Secure the access door. 4. Secure the box cover. Fuses 5or6 15 20 20 Fuse Panel 95