2008 Polaris Sportsman 800 EFI Owners Manual - Page 117
2008 Polaris Sportsman 800 EFI Manual
Page 117 highlights
Cleaning and Storage Storage Tips MAINTENANCE Fluid Levels Inspect the following fluid levels. Change fluids as recommended in the Periodic Maintenance Chart beginning on page 72. • Demand drive unit (front gearcase) • ADC fluid (ADC models) (change every two years) • Rear gearcase • Transmission • Brake fluid (change every two years and any time the fluid looks dark or contaminated) • Coolant (test strength) Fog the Engine 1. Treat the fuel system with Polaris Carbon Clean, following the instructions on the can. Run the engine for several minutes so the Carbon Clean reaches the injectors. Stop the engine. 2. Remove the spark plugs and add 2-3 tablespoons of Premium 4 Synthetic 0W40 engine oil. To access the plug holes, use a section of clear 1/4" hose and a small plastic squeeze bottle filled with the premeasured amount of oil. 3. Reinstall the spark plugs. Torque to specification. 4. Apply dielectric grease to the inside of each spark plug cap and reinstall the caps onto the plugs. 5. Turn the engine over several times. Oil will be forced in and around the piston rings and ring lands, coating the cylinder with a protective film of fresh oil. 6. If Polaris fuel system additive is not used, the fuel tank, fuel lines, and injectors should be completely drained of gasoline. 117