2008 Polaris 340 Edge Owners Manual - Page 96
2008 Polaris 340 Edge Manual
Page 96 highlights
Clutch System Drive Belt Installation 1. Drop the drive belt over the drive clutch and pull back the slack. MAINTENANCE NOTE: To ensure satisfactory belt life, install belts so they operate in the same direction of rotation by positioning the identification numbers so that you can read them. If required, separate the sheaves as outlined in the belt removal procedures. 2. Turn the driven clutch moveable sheave clockwise while pushing inward and forcing the belt down between the sheaves. 3. Hold the belt down between the sheaves and roll the bottom portion over the outer clutch sheave. Work the belt to the outer edge of the sheave. 4. Rotate the L-wrench to tighten the sheaves. Remove the wrench and store in the tool kit. 5. Close the clutch guard and reinstall the retaining pin. 6. Close and secure the hood and release the parking brake. 93