2005 Polaris Sportsman 600 Owners Manual - Page 85

MAINTENANCE AND LUBRICATION Engine Cooling System Radiator Coolant Level To ensure that the coolant maintains its ability to protect the engine, we recommend that the system be completely drained every two years and a fresh mixture of antifreeze and water added. Polaris recommends the use of Polaris Premium 60/40 anti-freeze/coolant or a 50/50 mixture of high quality aluminum compatible anti-freeze/coolant and distilled water. Polaris Premium 60/40 is already premixed and ready to use. Do not dilute with water. See page 113 for the part numbers of Polaris products. NOTE: Always follow the manufacturer's mixing recommendations for the freeze protection required in your area. Any time the cooling system has been drained for maintenance or repair, replace the coolant. If the recovery bottle has run dry, the level in the radiator should be inspected. Add coolant as needed. WARNING Escaping steam can cause severe burns. Never remove the pressure cap while the engine is warm or hot. Always allow the engine to cool before removing the pressure cap. 1. To access the radiator pressure cap, open the front box lid and pull open the access door. 2. Remove the pressure cap (1). 3. Using a funnel, slowly add coolant through the radiator filler neck. 4. Reinstall the pressure cap, secure the access door and close the box. NOTE: 1 Use of a non-standard pressure cap will not allow the recovery system to function properly. Contact your dealer for the correct replacement part. 82