2009 Kawasaki Vulcan 1700 Nomad 2T Owners Manual - Page 160

2009 Kawasaki Vulcan 1700 Nomad 2T Manual

Page 160 highlights

158 MAINTENANCE AND ADJUSTMENT will stop on its way, but will normally return when the battery is connected again. a light coat of grease on the ter• Put minals to prevent corrosion. the terminals with its protec• Cover tive cap. the battery holder, and tighten • Install the battery holder bolts. • Reinstall the removed parts. Headlight Beam Horizontal Adjustment The headlight beam is adjustable horizontally. If not properly adjusted horizontally, the beam will point to one side rather than straight ahead. Turn the horizontal adjusting screw on the headlight rim in or out until the beam points straight ahead. • CAUTION Do not remove the battery and fuse for 6 seconds after turning off the ignition switch. A. Horizontal Adjusting Screw B. Vertical Adjusting Screw

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202

158
MAINTENANCE AND ADJUSTMENT
will stop on its way, but will normally
return when the battery is connected
again.
Put a light coat of grease on the ter-
minals to prevent corrosion.
Cover the terminals with its protec-
tive cap.
Install the battery holder, and tighten
the battery holder bolts.
Reinstall the removed parts.
CAUTION
Do not remove the battery and
fuse for 6 seconds after turning
off the ignition switch.
Headlight Beam
Horizontal Adjustment
The
headlight
beam
is
adjustable
horizontally.
If not properly adjusted
horizontally, the beam will point to one
side rather than straight ahead.
Turn the horizontal adjusting screw
on the headlight rim in or out until the
beam points straight ahead.
A. Horizontal Adjusting Screw
B. Vertical Adjusting Screw