Marantz ST-17 ST-17 User Manual - Page 9
Butonns And Operation Of The, Remote Control Unit - remote rc 17st
View all Marantz ST-17 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
FRANÇAIS ENGLISH BUTONNS AND OPERATION OF THE REMOTE CONTROL UNIT DISPLAY button MONO button MEMO button DISPLAY 1 MONO 4 MEMO 7 BAND 23 56 89 0 BAND button Number buttons TUNING UP/DOWN buttons TUNING PRESET RC-17ST PRESET UP/DOWN buttons TUNING UP (į) / DOWN (Ĭ) BUTTON Every time the UP or DOWN side of the TUNING button is pressed, the receiving frequency varies in the upward or downward direction, in the steps of 50 kHz in FM band or 9 kHz in AM band. When the button is held depressed for more than 0.5 seconds, the receiving frequency varies continuously in the above-mentioned steps until a station is received. Press or hold the button until the desired frequency is displayed on the digital frequency indicator. PRESET UP (į) / DOWN (Ĭ) BUTTON Every time the UP or DOWN side of the PRESET button is pressed, the preset number will advanced one step in the upward or downward direction. The unused preset numbers without memory contents are skipped. This button is also used as the CURSOR button in the station name input mode. PRESET MEMORY ON THE REMOTE CONTROL UNIT This unit is equipped with the one-touch preset tuning system which is particularly convenient when there is a large number of receivable stations. The preset tuning system allows up to 60 stations on FM and AM to be preset in a random order. HOW TO PRESET A FREQUENCY IN THE MEMORY 1. Press the BAND button to select the desired band (FM/AM). 2. Press the TUNING UP/DOWN button to select the frequency of desired station. 3. When th desired station is received, press the MEMO button. 4. The MEMORY indicator blinks for about 5 seconds. Press the PRESET button within this time. 5. Example: To preset under preset no.15 MEMO PRESET PRESET 1 5 Press Press Press within 1.5 sec. Example: To preset under preset no. 3. MEMO PRESET PRESET 3 Press Press Leave for 1.5 sec. ¼ Preset tuning by recalling a preset station Select the preset no. of the desired station in the same manner as when presetting a station in the memory. DELETING THE CONTENTS OF THE PRESET MEMORY 1. Select the preset station you wish to delete. 2. Press the MEMO button. The "MEMORY" indicator will flash on the display. 3. While the "MEMORY" indicator is flashing (approx. 5 sec.), turn the GYRO CONTROL ring to set the present number to "00". 4. Press the MEMO button again. The preset number and "CLEAR" indicator will flash for approx. 2 seconds on the display and the memory will be deleted. Station names memorized for the preset station will also be deleted at the same time. 7