Bose Acoustimass SE-5 Owner's guide - Page 2
Before, Begin, Unpacking, System, Setting
View all Bose Acoustimass SE-5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Before You Begin ... We would like to thank you for purchasing the Bose. Acouslimassr,, SE-5 speaker system. This product combines two Bose technologies to create a versatile system that will anon you to experience the full realism and impact available tram the most demanding sound sources, including compact discs. Patented Acoustimass speaker technology offers the benefits of purer sound and virtual invisibility, while DirectiliellecAint) speaker design allows you to hear full balanced stereo throughout your listening room. We are confident that these advanced technologies and the quality construction of the SE•5 system will provide you with many years of trouble-free listening pleasure. The operating principles and wiring configuration of the SE.5 System are significantly different from those ol conventional speakers. This not only allows the SE-5 system to provide you with great sound, but also offers placement flexibility not available from conventional speakers. For best results, and easy installation. please take the time to read this owner's guide. Please Note: The Acousliniass speaker technology used in the SE.5 system significantfrreducesaudible distortion. Because ol this, you may be less likely to notice the distinct live distorted sounds produced when a speaker is driven beyond itslimits. Exercise caution whenplaying the SE-5 System at high volume levels. Unpacking the SE-5 System After opening the carton, remove all packing material and carefully lift out thecomponents ol the SE.5 system.Save all the cartons and packing material in case the system needs to be transported at a later time. If any of the components appear damaged. do not attempt to use the system. Instead, repack the system in its original carton and notify your authorized Bose dealer immediately. Setting Up the System Before you can install and adjust the system's components. takea minute to familiarizeyourself with them. Your system should include: 2 Stereo Targeting arrays 1Acoustimasso, module (the larger black cabinet) 4 wires The SE.5 system oilers many advantages not available from a conventional speaker system, among them, remarkable freedom of placement. Acoustimass speaker technology allows you to place the Acoustimass module almost anywhere, even under furniture. The compact Stereo Targeting arrays can also be positioned in your listening mom wherever they create the best balance of higher frequency sound. Below are some guidelines for setting up your system. A. Select the location where you intend to place the left and right Stereo Targeting arrays. Note Mal wires from the arrays connect to the Acoustimass module, so you ShOuld lOCate the Stereo Targeting arrays so that the wires will reach the location you have chosen for the module. Note: While the wires provided are adequate for most instal. 'lions. you may increase the distance between the Stereo Targeting= arrays and the Acoustimass module by splicing inadditional wire.llyou do so, use similar gauge (16 or IS gauge)or thicker wire, and make sure you maintain the cor reel phase("+" to"+* and "- " to "-").and properly con. nett the wires. o 0 •