Zenith C30W46 Operating Guide - Page 29
Antenna Connections
View all Zenith C30W46 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Antenna Connections Combination VHF/UHF Antennas 300 ohm Flat Wire 300 to 75 ohm Adapter TV rear 75 ohm Antenna Jack 75 ohm Coaxial Cable 75 ohm CATV Cable 300 to 75 ohm Adapter 300 ohm Flat Wire Connecting an Outdoor Antenna For the best reception, we recommend you use an outdoor antenna. Severely weathered antennas and antenna cables can reduce the signal quality. Check antenna and antenna cables condition before making connections. Any service center can explain the various outdoor antennas available to you. 300 Ohm Flat Wire 1. Connect the 300 ohm flat wire to screws on the 300 ohm to 75 ohm adapter. 2. Push the end of 300 ohm to 75 ohm adapter into 75 ohm antenna jack. 75 Ohm Coaxial Cable 1. Connect the 75 ohm coaxial cable directly to the 75 ohm antenna jack. Note: 300 ohm to 75 ohm adapter is sold separately. Connecting a CATV Cable If you subscribe to a CATV system (cable service), change the antenna connection as described below. 1. 75 ohm Antenna Jack 2. 300 to 75 ohm Adapter 75 ohm CATV Cable from cable TV source 1. Remove the 300 to 75 ohm adapter or the cable from the set if attached. 2. Connect the CATV cable (75 ohm coaxial cable) to the 75 ohm antenna jack. 29