Zanussi ZWF844B4PW User Manual - Page 8
diameter of the drain hose.
View all Zanussi ZWF844B4PW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
You can extend the drain hose to maximum 400 cm. Contact the authorised service centre for the other drain hose and the extension. It is possible to connect the drain hose in different ways: 1. Make a U shape with the drain hose and put it around the plastic hose guide. 4. To a stand pipe with vent hole - Insert the drain hose directly into a drain pipe. Refer to the illustration. 2. On the edge of a sink - Fasten the guide to the water tap or to the wall. The end of the drain hose must always be ventilated , i.e. the inner diameter of the drain pipe (min. 38 mm - min. 1.5") must be larger than the external diameter of the drain hose. 5. Without the plastic hose guide, to a sink spigotPut the drain hose in the spigot and tighten it with a clamp. Refer to the illustration. Make sure that the plastic guide cannot move when the appliance drains and the drain hose end is not immersed in the water. There may be a return of dirty water into the appliance. 3. If the end of the drain hose looks like this (see the picture), you can push it directly into the stand pipe. Make sure that the drain hose makes a loop to prevent particles going into the appliance from the sink. 1 ø16 2 W011 Connect the drain hose to the spigot and tighten it with a clamp. Make sure that the drain hose makes a loop to prevent particles going into the appliance from the sink. 6. Position the hose directly to a built-in drain pipe in the room wall and tighten it with a clamp. 8