Zanussi ZWF844B4PW User Manual - Page 3
Safety Instructions
View all Zanussi ZWF844B4PW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
- staff kitchen areas in shops, offices and other working environments; - by clients in hotels, motels, bed & breakfast and other residential type environments; - areas for communal use in blocks of flats or in launderettes. • Do not exceed the maximum load of 8 kg (refer to the "Programme chart" chapter). • The operating water pressure at the water entry point from the outlet connection must be between 0.5 bar (0.05 MPa) and 8 bar (0.8 MPa). • The ventilation opening in the base must not be covered by a carpet, mat, or any floor covering. • The appliance must be connected to the water mains using the new supplied hose sets, or other new hose sets supplied by the Authorised Service Centre. • Old hose sets must not be reused. • If the mains power supply cable is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons to avoid an electrical hazard. • Before any maintenance operation, deactivate the appliance and disconnect the mains plug from the socket. • Do not use high pressure water sprays and/or steam to clean the appliance. • Clean the appliance with a moist cloth. Use only neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects. SAFETY INSTRUCTIONS INSTALLATION The installation must comply with relevant national regulations. • Remove all the packaging and the transit bolts including rubber bush with plastic spacer. • Keep the transit bolts in a safe place. If the appliance is to be moved in the future they must be reattached to lock the drum to prevent an internal damage. • Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear. • Follow the installation instructions supplied with the appliance. • Do not install or use a damaged appliance. • Do not install or use the appliance where the temperature can be less than 0°C or where it is exposed to the weather. • The floor area on which the appliance is to be installed must be flat, stable, heat resistant and clean. 3