Zanussi ZWF142F1DG User Manual - Page 28

Emergency Drain, Frost Precautions, Consumption Values, Introduction, Legend

Get Zanussi ZWF142F1DG PDF manuals and user guides View all Zanussi ZWF142F1DG manuals
Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

45° 20° EMERGENCY DRAIN If the appliance cannot drain the water, carry out the same procedure, described in 'Cleaning the drain pump' paragraph. If necessary, clean the pump. FROST PRECAUTIONS If the appliance is installed in an area where the temperature can reach values around 0° C or drop below, remove the remaining water from the inlet hose and the drain pump. 1. Disconnect the mains plug from the mains socket. 2. Close the water tap. CONSUMPTION VALUES INTRODUCTION 3. Put the two ends of the inlet hose in a container and let the water flow out of the hose. 4. Empty the drain pump. Refer to the emergency drain procedure. 5. When the drain pump is empty, install the inlet hose again. WARNING! Make sure that the temperature is higher than 0 °C before you use the appliance again. The manufacturer is not responsible for damages caused by low temperatures. See the web link www.theenergylabel.eu for detailed information about Energy Label. The QR code on the energy label supplied with the appliance provides a web link to the product information sheet. Keep the energy label for reference together with the user manual and all other documents provided with this appliance. LEGEND kg kWh Litres % Laundry load. hh:m m Programme duration. Energy consumption. °C Temperature in the laundry. Water consumption. rpm Spin speed. Remaining moisture at the end of spinning phase. The higher is the spin speed, the higher is the noise and the lower is the remaining moisture. 28

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
45°
20°
EMERGENCY DRAIN
If the appliance cannot drain the water, carry out
the same procedure, described in 'Cleaning the
drain pump' paragraph. If necessary, clean the
pump.
FROST PRECAUTIONS
If the appliance is installed in an area where the
temperature can reach values around 0° C or drop
below, remove the remaining water from the inlet
hose and the drain pump.
1.
Disconnect the mains plug from the mains
socket.
2.
Close the water tap.
3.
Put the two ends of the inlet hose in a
container and let the water
flow
out of the
hose.
4.
Empty the drain pump. Refer to the emergency
drain procedure.
5.
When the drain pump is empty, install the inlet
hose again.
WARNING!
Make sure that the
temperature is higher than 0 °C before
you use the appliance again.
The manufacturer is not responsible
for damages caused by low
temperatures.
CONSUMPTION VALUES
INTRODUCTION
See the web link
www.theenergylabel.eu
for detailed informa-
tion about Energy Label.
The QR code on the energy label supplied with the appliance pro-
vides a web link to the product information sheet. Keep the energy
label for reference together with the user manual and all other
documents provided with this appliance.
LEGEND
kg
Laundry load.
hh:m
m
Programme duration.
kWh
Energy consumption.
°C
Temperature in the laundry.
Litres
Water consumption.
rpm
Spin speed.
%
Remaining moisture at the end of spinning phase. The higher is the spin speed, the higher is
the noise and the lower is the remaining moisture.
28