Zanussi ZWD76NB4PW User Manual - Page 8
INFORMATION FOR INSTALLATION, Positioning and levelling, WARNING, The inlet hose
View all Zanussi ZWD76NB4PW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
drum. 8. Remove the three bolts. Use the key supplied with the appliance. Pull out the plastic spacers. 5. Put one of the polystyrene packaging elements on the floor behind the appliance. Carefully put down the appliance with the rear side on it. Make sure not to damage the hoses. 9. Put the plastic caps in the holes. You can find these caps in the user manual bag. 6. Remove the polystyrene protection from the bottom. Pull up the appliance in vertical position. 1 2 7. Remove the power supply cable and the drain hose from the hose holders. We recommend that you keep the packaging and the transit bolts for any movements of the appliance. . INFORMATION FOR INSTALLATION Positioning and levelling Adjust the appliance correctly to prevent vibration, noise and movement of the appliance when it operates. 1. Install the appliance on a flat hard floor. The appliance must be levelled and stable. Make sure that the appliance does not touch the wall or other units and there is air circulation below the appliance. 2. Loosen or tighten the feet to adjust the level. All feet must rest firmly on the floor. WARNING! Do not put cardboard, wood or equivalent materials below the appliance feet to adjust the level. The inlet hose 8