Zanussi ZWD76NB4PW User Manual - Page 7
Installation
View all Zanussi ZWD76NB4PW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Electrical connection Voltage Overall power Fuse Frequency Level of protection against ingress of solid particles and moisture ensured by the protective cover, except where the low voltage equipment has no protection against moisture Water supply 1) Water supply pressure 2) Minimum Maximum 230-240 V 2200 W 13 A 50 Hz IPX4 Cold water 0.5 bar (0.05 MPa) 8 bar (0.8 MPa) Maximum wash load Cotton 7 kg Maximum dry load Cotton 4 kg Synthetics 3 kg Spin Speed Maximum spin speed 1551 rpm 1) Connect the water inlet hose to a water tap with a 3/4'' thread. 2) The appliance works correctly if the water pressure is not lower than 0.05 MPa (0.5 bar). If you cannot connect the water inlet hose to the cold water tap of the primary hydraulic system, connect it to your domestic cold water storage system. Make sure not to exceed a distance of 5.02 m (16.5 ft) between the appliance inlet hose and the bottom of the water storage tank. INSTALLATION WARNING! Refer to Safety chapters. 2. Remove the cardboard top. Remove the polystyrene packaging materials. UNPACKING WARNING! Remove all the packaging and the transit bolts before installing the appliance. 1. Use the gloves. Remove the external film. If necessary, use a cutter. 3. Remove the internal film. 4. Open the door. Remove the polystyrene piece from the door seal and all the items from the 7