Zanussi ZW84PCBI User Manual - Page 10

The inlet hose, WARNING, Water drainage

Get Zanussi ZW84PCBI PDF manuals and user guides View all Zanussi ZW84PCBI manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

The inlet hose 45O 20O 1. Remove the inlet hose from inside the drum. 2. To connect the water inlet hose towards the proper direction and with the proper inclination, check the position of the water tap before connecting it to the back of the appliance. Make sure the hose is nor kinked, squashed but neither tensed. 3. Connect the hose to the back of the appliance. Do not turn the inlet hose downwards, but turn it left or right depending on the position of your water tap. 4. Loosen the ring nut to fix it in the correct position. 5. Connect the water inlet hose to the cold water tap with 3/4 thread. WARNING! The inlet water shall not exceed 25 °C. WARNING! Make sure that there are no leaks from the couplings. Use the hose supplied with appliance. Do not use an extension hose if the inlet hose is too short. Contact the Authorised Service Centre for an inlet hose replacement. Water drainage The drain hose can be connected: 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
The inlet hose
1.
Remove the inlet hose from inside the drum.
2.
To connect the water inlet hose towards the prop-
er direction and with the proper inclination, check the
position of the water tap before connecting it to the
back of the appliance.
Make sure the hose is nor kinked,
squashed but neither tensed.
20
O
20
O
45
O
45
O
3.
Connect the hose to the back of the appliance. Do
not turn the inlet hose downwards, but turn it left or
right depending on the position of your water tap.
4.
Loosen the ring nut to
fix
it in the correct position.
5.
Connect the water inlet hose to the cold water tap
with 3/4 thread.
WARNING!
The inlet water shall not ex-
ceed 25 °C.
WARNING!
Make sure that there are
no leaks from the couplings.
Use the hose supplied with appliance.
Do not use an extension hose if the inlet hose is too short. Contact the Authorised Service
Centre for an inlet hose replacement.
Water drainage
The drain hose can be connected:
10