Zanussi ZCI66278XA User Manual - Page 26
Levelling Of The Appliance
View all Zanussi ZCI66278XA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Minimum distances Dimension mm A 685 LEVELLING OF THE APPLIANCE COVERING TERMINAL BOARD Use small feet on the bottom of appliance to set the appliance top surface level with other surfaces. ELECTRICAL INSTALLATION WARNING! The manufacturer is not responsible if you do not follow the safety precautions from Safety chapters. This appliance is supplied without a main plug or a main cable. Applicable types of cables for different phases: • The recommended cross-section area is six square millimetres (6 mm²). • When you refit the mains terminal cover, make sure that the lower tabs are located inside the bottom edge of the aperture, before you fix the two screws into the top edge of the mains terminal cover. • Make sure that the cover is securely fastened. To open the cover of terminal board obey the procedure in opposite sequence. TERMINAL BOARD Do not remove blanking plates. Make sure that the links are fitted as shown. Phase Min. size cable 1 3 with neutral 3x6.0 mm² 5x1.5 mm² WARNING! The power cable must not touch the part of the appliance shaded in the illustration. L L N N N 26