Zanussi ZBB28441SV User Manual - Page 3
Safety Instructions - not cold
View all Zanussi ZBB28441SV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
• Do not damage the refrigerant circuit. • Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer. • Do not use water spray and steam to clean the appliance. • Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects. • Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance. • If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. SAFETY INSTRUCTIONS INSTALLATION WARNING! Only a qualified person must install this appliance. ELECTRICAL CONNECTION WARNING! Risk of fire and electric shock. • Remove all the packaging and the transit bolts. • Do not install or use a damaged appliance. • Follow the installation instructions supplied with the appliance. • Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear. • Make sure the air can circulate around the appliance. • At first installation or after reversing the door wait at least 4 hours before connecting the appliance to the power supply. This is to allow the oil to flow back in the compressor. • Before carrying out any operations on the appliance (e.g. reversing the door), remove the plug from the power socket. • Do not install the appliance close to radiators or cookers, ovens or hobs. • Do not install the appliance where there is direct sunlight. • Do not install this appliance in areas that are too humid or too cold. • When you move the appliance, lift it by the front edge to avoid scratching the floor. • The appliance contains a bag of desiccant. This is not a toy. This is not food. Please dispose of it immediately. • The appliance must be earthed. • Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply. • Always use a correctly installed shockproof socket. • Do not use multi-plug adapters and extension cables. • Make sure not to cause damage to the electrical components (e.g. mains plug, mains cable, compressor). Contact the Authorised Service Centre or an electrician to change the electrical components. • The mains cable must stay below the level of the mains plug. • Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation. • Do not pull the mains cable to disconnect the appliance. Always pull the mains plug. USE WARNING! Risk of injury, burns, electric shock or fire. • Do not change the specification of this appliance. 3