Zanussi ZBB28441SV User Manual - Page 10
Installation - spare parts
View all Zanussi ZBB28441SV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
If the advice does not lead to the desired result, contact the nearest Authorised Service Centre. REPLACING THE LAMP The appliance is equipped with a longlife LED interior light. It is strongly recommended to use original spare parts only. Use LED bulbs (E14 base) only. The maximum power is shown on the lamp unit. CAUTION! Disconnect the plug from the mains socket. 1. With your fingers, spread slightly both sides of the transparent cover to unhook them and detach the cover pulling it in the direction of the arrows. 1 2. Replace the lamp with the one that has identical characteristics and is specifically designed for household appliances. 3. Reassemble the lamp cover. 4. Connect the plug to the mains socket. 5. Open the door. Make sure that the light switches on. CLOSING THE DOOR 1. Clean the door gaskets. 2. If necessary, adjust the door. Refer to assembly instructions. 3. If necessary, replace the defective door gaskets. Contact the Authorised Service Centre. 2 1 INSTALLATION LOCATION Refer to the assembly instructions for the installation. To ensure best performance, install the appliance well away from sources of heat such as radiators, boilers, direct sunlight etc. Make sure that air can circulate freely around the back of the cabinet. POSITIONING Install the appliance in a dry, well ventilated indoors where the ambient temperature corresponds to the climate class indicated on the rating plate of the appliance. Climate class Ambient temperature SN +10°C to + 32°C N +16°C to + 32°C ST +16°C to + 38°C T +16°C to + 43°C 10