Yamaha YAS-209 YAS-209 Owners Manual - Page 43

Selecting the HDMI signal format, Within 30 seconds, press and hold the PAIRING button

Get Yamaha YAS-209 PDF manuals and user guides View all Yamaha YAS-209 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

3 Within 30 seconds, press and hold the PAIRING button on the rear panel of the subwoofer for at least five seconds. When the center unit and subwoofer have been paired successfully, the * indicator will glow. * indicator PAIRING button If the * indicator on the subwoofer does not glow after following the procedure described here, see "No sound is coming from the subwoofer" (p.50). Selecting the HDMI signal format Problems such as a lack of sound or the appearance of abnormal colors in a video may occur when some AV devices are connected to the unit. Should this occur, changing the setting may resolve these issues. Mode 1 (default) Mode 2 Select this mode in most cases. Select this mode if problems such as the appearance of abnormal colors in video have occurred. 1 Turn on the unit. 2 Press STEREO for at least five seconds. STEREO Once the indicator has shown the setting applied to the unit as follows, the unit will turn on. Glows (mode 1) Off (mode 2) 43 En

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
3
Within 30 seconds, press and hold the PAIRING button
on the rear panel of the subwoofer for at least five
seconds.
When the center unit and subwoofer have been paired
successfully, the
*
indicator will glow.
PAIRING button
indicator
*
If the
*
indicator on the subwoofer does not glow after following the
procedure described here, see “No sound is coming from the
subwoofer” (p.50).
Selecting the HDMI signal format
Problems such as a lack of sound or the appearance of abnormal colors
in a video may occur when some AV devices are connected to the unit.
Should this occur, changing the setting may resolve these issues.
Mode 1 (default)
Select this mode in most cases.
Mode 2
Select this mode if problems such as the appearance of
abnormal colors in video have occurred.
1
Turn on the unit.
2
Press STEREO for at least five seconds.
STEREO
Once the indicator has shown the setting applied to the unit
as follows, the unit will turn on.
Glows (mode 1)
Off (mode 2)
En
43