Yamaha YAS-107 YAS-107 Owners Manual - Page 20

Mount the unit on a wall CAUTION • When mounting the unit on a wall, all installation work must be performed by a qualified contractor or dealer. The customer must never attempt to perform this installation work. Improper or inadequate installation could cause the unit to fall, resulting in personal injury. • To prevent the unit from falling, attach it to a wall constructed of drywall (plasterboard). • Make sure you use commercially available screws that can support the weight of the installation (specified in Step 2 on the right). Using clamps other than specified screws, such as short screws, nails, and two-sided tape, may cause the unit to fall. • Fix the cables in place where they will not become loose. If your foot or hand accidentally gets caught on a loose cable, the unit may fall. • Do not lean on the unit or apply excessive force to the top of the unit. Doing so may cause the unit to fall. • Check that the unit is fixed securely after the installation. Yamaha will bear no responsibility for any accidents caused by improper installations. 1 Attach the mounting template on a wall and mark for the screw holes. Mounting template (supplied) Tapes or thumbtacks Screw holes 2 Remove the mounting template from the wall, then install commercially available screws (as illustrated below) at the points marked on the wall. 7 to 9 mm (1/4" to 3/8") 13 to 15 mm (1/2" to 5/8") 4 mm (#8) 20 mm (3/4") or more 20 En