Xerox 850DX Xerox Wide Format AccXES HP-PJL SRS version 10.0 - Page 46

Version 10.0 HPGL Default Merge Control HPGL Default Number of Pens HPGL Mode HPGL palette name HPGL palette source HPGL Ignore PS Command HPGL Force Round Line Ends AccXES PJL Interface which set/change the Current Active Position (CAP) - an x and y raster location in job space. HPDEFAULTMC HPDEFAULTNP HPGLMODE HPGLPALETTE HPGLPALETTESOURCE HPIGNOREPS HPROUNDLINEENDS R/W, Bool R/W, Int R/W, Enum R/W, String R/W, Enum R/W, Bool R/W, Bool If HPRTLNATIVEMODE is "OFF", the interpreter calculates the CAP positions using the value of the RESOLUTION variable - this is the default. If the setting is "ON", it uses 400 dpi (ala 8830). Establishes the default HPGL Merge Control setting. Range: {OFF, ON} Default: OFF Specifies the default number of Pens for the pen pallete. Can be overriden by NP command, or set in place of specifying NP in file. Range: {1..256} Selects the HPGL Emulation Mode. Range: { HPGL2, HPGL758X} Default: HPGL2 HPGL default palette. Range: String max 32 characters. Default: "0" Sets the source of control for pens in HPGL files. Can be set to JOB so that after initialization, the palette assigned by HPGLPALETTE is ignored. Otherwise, set to PRINTER so that the palette named by HPGLPALETTE determines the pen settings. Range: {JOB, PRINTER} Default: JOB Tells the controller to ignore the HPGL PS command which defines page size for HPGL/2 files. When set to ON the PS command is ignored. When OFF the PS command is used to determine page size. Range: {ON, OFF} Default: OFF When set to ON all vector lines are drawn with round ends and joints. When set to Page 41 of 160