Vtech DS6752-4 Users Manual - Page 8
Battery charging
![]() |
View all Vtech DS6752-4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Getting started Battery charging Once you have installed the battery, the handset LCD display indicates the battery status (see the table below). NOTES • For best performance, keep the handset in the telephone base or charger when not in use. • The battery is fully charged after 11 hours of continuous charging. • If you place the handset in the telephone base or the charger without plugging in the battery, the screen displays NO BATTERY. Battery indicators The screen is blank, or displays Put in charger and flashes. The screen displays Low battery and flashes. The screen displays HANDSET X. Battery status Action The battery has no or very little charge. The handset cannot be used. Charge without interruption (at least 30 minutes). The battery has enough Charge without interruption charge to be used for a short (about 30 minutes). time. The battery is charged. To keep the battery charged, place it in the telephone base or charger when not in use. When it is fully charged, you can expect the following performance: Operation Operating time While in handset use (talking*) Seven hours While in speakerphone mode (talking*) Three hours and 30 minutes While not in use (standby**) Five days * Operating times vary depending on your actual use and the age of the battery. ** Handset is not charging or in use. After you install your telephone or power returns following a power outage, the handset will prompt you to set the date and time. For instructions, see Set date and time on page 24. To skip setting, press CANCEL. Date: MM/DD/YY ECO ANS ON
![](/manual_guide/products/vtech-ds67524-users-manual-4124562/8.png)