Viper Responder One Owner Manual - Page 11

To shut off the remote start: While the vehicle is remote started press and hold the button on the remote for 3 seconds. The remote plays the remote start shut off tones and the orange LED flashes 1 time. The vehicle shuts down from the remote start mode. Once the remote start is on, when you are ready to drive the vehicle: 1. Insert the ignition key and turn it to the ON (not the START) position. 2. Press the brake pedal. The vehicle stays running and is ready to drive. Note: If the brake pedal is pressed before the key is in the ON position, the engine shuts down. While the vehicle is running during remote start operation, the system monitors the vehicle and automatically shuts down the engine if the system receives any of the following shut-down inputs: • The brake pedal is pressed. • The hood is opened. • The shutdown toggle switch is put into the ON position. • The pre-programmed run time has elapsed. • The single button is pressed and held for 3 seconds. © 2008 Directed Electronics. All rights reserved. 11