Viper 4704 Owner Manual - Page 16
Basic commands Direct Access - valet mode
View all Viper 4704 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Basic commands (Direct Access) Lock Press and release The doors lock and the horn honks (if connected) and 6:30 parking lights flash once. The LOCKED text and beeps play to confirm and the System Status Icons update. If Valet mode* is On the doors lock and the VALET text and tone play. Exit Valet mode to Lock the system normally. Commands If the door was open when locking, you are notified of an active zone immediately after locking the system. The horn in the vehicle "honks" again. The 2-way remote control sounds a short "error" tone, and the LCD displays the door icon. Note: the optional door input and horn honk must be connected for the system to give notification. To Lock and Panic Press and hold The system Locks (or Locks in Valet) and, after 2 seconds, sounds the horn and flashes the parking lights. The PANIC text displays and horn honks to confirm. Press the or button to stop the output. Unlock Press and release The doors unlock (if connected), and the horn honks (if connected) and parking lights flash twice. The UNLOCKED text and beeps play to confirm and the system status icons update. If Valet mode* is On the doors unlock and the VALET text and tone play. © 2011 Directed Electronics. All rights reserved. 13