Viper 3903V Owner Manual - Page 18

✂ Cut along dotted line and fold for a quick and easy reference to keep in your purse or wallet. QUICK REFERENCE GUIDE: To arm the system ■ You can arm the system by locking the doors with your factory keyless entry transmitter. When the system arms, your will hear a short chirp, and see the parking lights flash once. To disarm the system ■ To disarm the system, unlock the doors using your factory keyless transmitter. You will hear two chirps, and the parking lights will flash twice. Disarming without a transmitter ■ Turn on the ignition. Press the integrated LED/Valet® switch the programmed number of times within 10 seconds. The system should now disarm. If it does not, you may have waited too long. Turn the ignition off and on and try again. To enter or exit Valet® Mode ■ Turn ignition to "run" position, then turn to "off" position. Press and release the integrated LED/Valet®switch within 10 seconds. The status LED will light solid if you are entering Valet® Mode, and it will go out if you are exiting Valet® Mode. ✂ © 2007 Directed Electronics - all rights reserved 15