Viper 330V Owner Manual - Page 8
disarming, disarming without a transmitter, valet
View all Viper 330V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
disarming To disarm the system, unlock the doors using your factory keyless transmitter. The horn will sound twice, and the parking lights will flash twice. If the horn sounds either four or five times when disarming, refer to the Diagnostics section of this guide. This is called Tamper Alert. disarming without a transmitter This feature allows you to override the system without the transmitter should it be lost, damaged or disabled. To do this, you must have the vehicle's ignition key and know where the Valet® switch is located. Turn the ignition to the "run"position. Press and release the Valet® switch, within 10 seconds. After a few seconds the LED will stop flashing and the vehicle DRW-35 should start. If it does not, you may have waited too long. Turn the ignition off and try again. note: The setting for the number of times the Valet® switch must be pressed is set in the Programming Section of this guide. valet® mode You can prevent your system from arming, by using Valet® Mode. This is very useful when washing the vehicle or having it serviced. In Valet® Mode, the system will not arm, even with the transmitter, but all convenience functions (door locks, trunk release, etc.) will work normally. © 2005 directed electronics, inc. 5