Viper 330V Owner Manual - Page 13

each time it is disarmed, until the next time the ignition key is turned on. table of zones The zone number is the number of LED flashes used by the system to identify that input. The standard input assignments are listed below. ZONE (Number LED Flashes) DESCRIPTION 1 Instant trigger - often used for hood/trunk pin switches 2 Instant trigger - a heavier impact detected by the shock sensor 3 Door switch trigger 4 Optional sensor 5 Ignition trigger The LED will not report if the Warn Away response is triggered. rapid resume logic This system will store its current state to non-volatile memory. If power is lost and then reconnected the system will recall the stored state from memory. This means if the unit is in Valet® Mode and the battery is disconnected for any reason, such as servicing the car, when the battery is reconnected the unit will still be in Valet® Mode. This applies to all states of the system including arm, disarm, and Valet® Mode. 10 © 2005 directed electronics, inc.