URC TRC-820 Owners Manual - Page 6

TRC-820 TWO-WAY REMOTE Connecting and Charging the Battery Pack ● Remove the battery cover by sliding it down and away from the remote The battery is included when shipped from the factory ● Place the battery in the compartment, making sure to align the contacts on the battery to the contacts on the TRC-820 The battery will snap into place when aligned properly ● Replace the battery cover ● Plug the 5V DC charger into a power outlet and plug the Micro USB connector into the port at the bottom of the TRC-820 There is no harm in leaving the TRC-820 on its charging base when it is not in use The TRC-820's battery can take up to five hours to fully charge. To check the current level disconnect the charger from the remote; the battery level indicator at the top right corner of display now shows the current level. Two-Way via Wi-Fi To operate as part of a Total Control system the TRC-820 connects to your LAN via Wi-Fi (IEEE 802.11 b/g/n) provided by a wireless access point or wireless router. This is not configurable by the end-user, ask your professional custom integrator for details. Page 3