URC TRC-1080 Owners Manual - Page 6
Connecting the Battery Pack, Using the Charging Base, Two-Way via Wi-Fi
View all URC TRC-1080 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
TRC-1080 TWO-WAY REMOTE Connecting the Battery Pack Press the spring lock down to unlock and remove the cover. The battery is included in the box when shipped from the factory. Place the battery into the battery compartment, making sure to align the contacts on the battery to the contacts on the TRC-1080. The battery will snap into place when aligned properly. Replace the cover. Using the Charging Base Plug the 6V DC adapter into a power outlet and into the rear of the charging base. (Also plugs into the remote for direct charging.) Gently place the TRC-1080 into the cradle. The remote automatically aligns itself to the contacts on the charging base. The status light should immediately illuminate. ● Red indicates that it is charging. ● Blue shows that it is fully charged. There is no harm in leaving the TRC-1080 on its charging base when it is not in use. Two-Way via Wi-Fi To use the TRC-1080 with any two-way companion product, it must be configured by your installer to be part of a LAN (local area network) via a Wi-Fi b/g access point or router. This is not user configurable. If you have any questions, consult your custom installer. Page 3