URC MXHP-H500 Owners Manual - Page 10
Status LED, Green
View all URC MXHP-H500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Status LED The Status LED has six (6) possible states. ● Blue ❑Steady: Indicates that the hub is connected to the MX-HomePro server and is fully programmed to control the home. ❑Blinking: Indicates that the hub is being programmed by the MX-HomePro server. ● Red ❑Steady: Indicates that the hub is connected to the MX-HomePro server, but has not been programmed. ❑Blinking: Indicates that the hub cannot connect to the MX-HomePro server, please check the network connection/settings. ● Green ❑Steady: Indicates that the hub is operating in a secondary room within the system. ❑Blinking: Indicates that the hub's firmware is currently being updated. Page 7
Page 7
Status LED
The Status LED has six (6) possible states.
●
Blue
❑
Steady
: Indicates that the hub is connected to the MX-HomePro server and is fully
programmed to control the home.
❑
Blinking
: Indicates that the hub is being programmed by the MX-HomePro server.
●
Red
❑
Steady
:
Indicates that the hub is connected to the MX-HomePro server, but has not
been programmed.
❑
Blinking
:
Indicates that the hub cannot connect to the MX-HomePro server, please
check the network connection/settings.
●
Green
❑
Steady
: Indicates that the hub is operating in a secondary room within the system.
❑
Blinking
: Indicates that the hub’s firmware is currently being updated.