URC MX-5000 Owners Manual - Page 5

MX-5000 TWO WAY TOUCH SCREEN Connecting the Battery Pack Unlock the rear cover by pressing down on the spring lock at the top of the cover. Remove the cover. For shipment from the factory, the battery is left out of the MX-5000. Place the battery into the battery compartment, making sure you align the contacts on the battery to the contacts on the MX-5000. The battery will snap into place when aligned properly. Replace the cover and snap it into place. Using the Charging Base Plug the 6V DC adapter into a power outlet and into the back of the charging base. Gently place the MX-5000 into the cradle of the charging base. It automatically aligns itself to the contacts on the charging base. The status indicator should immediately light. Red indicates that it is charging. Blue shows that it is fully charged. There is no harm in leaving the MX-5000 on its charging base whenever it is not in use. Two Way via Wi-Fi Red indicates charging, Blue that the remote is fully charged. To use the MX-5000 with any two way companion product, the MX-5000 must be configured by your installer to be part of a LAN (local area network) via a Wi-Fi b/g access point or router. This is not user configurable. If you have any questions, consult with your custom installer. Page 2