URC MRF-260 Owners Manual - Page 12
Step 5 - Make sure that the ID# is set on both the remote and on, the wheel of the MRF-260.
View all URC MRF-260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
MRF-260 BASE STATION In the figure below, each device is set to a specific flasher. Note: Remember, the MRF-260 will only respond to selections 1 through 4. Step 5 - Make sure that the ID# is set on both the remote and on the wheel of the MRF-260. Click on the Receivers button and set the RF address to one of the first 15 addresses (1-9 or A, B, C, D or E). The second set of addresses is only supported by MSC units. Step 6 - Close the RF window and Download to the Remote. Page 9
Page 9
MRF-260 B
ASE
S
TATION
In the figure below, each device is set to a specific flasher.
Note:
Remember, the MRF-260 will only respond to selections 1
through 4.
Step 5 - Make sure that the ID# is set on both the remote and on
the wheel of the MRF-260.
Click on the Receivers button and set the RF address to one of the
first 15 addresses (1-9 or A, B, C, D or E). The second set of address-
es is only supported by MSC units.
Step 6 - Close the RF window and Download to the Remote.